Stabilization of natural gas foams using different surfactants at high pressure and high temperature conditions

Natural gas foam can be used for mobility control and channel blocking during natural gas injection for enhanced oil recovery, in which stable foams need to be used at high reservoir temperature, high pressure and high water salinity conditions in field applications. In this study, the performance of methane (CH₄) foams stabilized by different types of surfactants was tested using a high pressure and high temperature foam meter for surfactant screening and selection, including anionic surfactant (sodium dodecyl sulfate), non-anionic surfactant (alkyl polyglycoside), zwitterionic surfactant (dodecyl dimethyl betaine) and cationic surfactant (dodecyl trimethyl ammonium chloride), and the results show that CH₄-SDS foam has much better performance than that of the other three surfactants. The influences of gas types (CH₄, N₂, and CO₂), surfactant concentration, temperature (up to 110°C), pressure (up to 12.0 MPa), and the presence of polymers as foam stabilizer on foam performance was also evaluated using SDS surfactant. The experimental results show that the stability of CH₄ foam is better than that of CO₂ foam, while N₂ foam is the most stable, and CO₂ foam has the largest foam volume, which can be attributed to the strong interactions between CO₂ molecules with H₂O. The foaming ability and foam stability increase with the increase of the SDS concentration up to 1.0 wt% (0.035 mol/L), but a further increase of the surfactant concentration has a negative effect. The high temperature can greatly reduce the stability of CH₄-SDS foam, while the foaming ability and foam stability can be significantly enhanced at high pressure. The addition of a small amount of polyacrylamide as a foam stabilizer can significantly increase the viscosity of the bulk solution and improve the foam stability, and the higher the molecular weight of the polymer, the higher viscosity of the foam liquid film, the better foam performance.     

Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

The effects of fuel variability on the electrical performance and durability of a solid oxide fuel cell operating on biohythane

Biohythane is typically composed of 60/30/10 vol% CH₄/CO₂/H₂ and can be produced via two-stage anaerobic digestion of renewable and low carbon biomass with much greater efficiency compared with CH₄/CO₂ biogas. This work investigates the effects of fuel variability on the electrical performance and fuel processing of a commercially available anode supported solid oxide fuel cell (SOFC) operating on biohythane mixtures at 750 °C. Cell electrical performance was characterised using current-voltage curves and electrochemical impedance spectroscopy. Fuel processing was characterised using quadrupole mass spectroscopy. It is shown that when H₂/CO₂ is blended with CH₄ to make biohythane, the SOFC efficiency is significantly increased, high SOFC durability is achieved, and there are considerable savings in CH₄ consumption. Enhanced electrical performance was due to the additional presence of H₂ and promotion of CH₄ dry reforming, the reverse Boudouard and reverse water-gas shift reactions. These processes alleviated carbon deposition and promoted electrochemical oxidation of H₂ as the primary power production pathway. Substituting 50 vol% CH₄ with 25/75 vol% H₂/CO₂ was shown to increase cell power output by 81.6% at 0.8 V compared with pure CH₄. This corresponded to a 3.4-fold increase in the overall energy conversion efficiency and a 72% decrease in CH₄ consumption. A 260 h durability test demonstrated very high cell durability when operating on a typical 60/30/10 vol% CH₄/CO₂/H₂ biohythane mixture under high fuel utilisation due to inhibition of carbon deposition. Overall, this work suggests that decarbonising gas grids by substituting natural gas with renewably produced H₂/CO₂ mixtures (rather than pure H₂ derived from fossil fuels), and utilising in SOFC technology, gives considerable gains in energy conversion efficiency and carbon emissions savings.     

Input-to-state learning of recurrent neural networks with delay and disturbance

This article deals with the issue of input-to-state stabilization for recurrent neural networks with delay and external disturbance. The goal is to design a suitable weight-learning law to make the considered network input-to-state stable with a predefined -gain. Based on the solution of linear matrix inequalities, two schemes for the desired learning law are presented via using decay-rate-dependent and decay-rate-independent Lyapunov functionals, respectively. It is shown that, in the absence of external disturbance, the proposed learning law also guarantees the exponential stability of the network. To illustrate the applicability of the present weight-learning law, two numerical examples with simulations are given.     

Fabrication,permeation, and corrosion stability measurements of silica membranes for HI decomposition in the thermochemical iodine–sulfur process

In this study, a corrosion-stable silica membrane was developed to be used in H₂ purification during the hydrogen iodide decomposition (2HI → H₂ + I₂), which is a new application of the silica membranes. From a practical perspective, the membrane separation length was enlarged up to 400 mm and one end of the membrane tubes was closed to avoid any thermal variation along the membrane length and sealing issues. The silica membranes consisted of a three-layer structure comprising a porous α-Al₂O₃ ceramic support, an intermediate layer, and a top silica layer. The intermediate layer was composed of γ-Al₂O₃ or silica, and the top silica layer that is H₂ selective was prepared via counter-diffusion chemical vapor deposition of a hexyltrimethoxysilane.To the best of our knowledge, this is the first report of 400-mm-long closed-end silica membranes supported on Si-formed α-Al₂O₃ tubes produced via chemical vapor deposition method. A 400-mm-long closed-end membrane using a Si-formed α-Al₂O₃ tube exhibited a higher H₂/SF₆ selectivity of 1240 but lower H₂ permeance of 1.4 × 10⁻⁷ mol Pa⁻¹ m⁻² s⁻¹ with compared with the membrane using a γ-Al₂O₃-formed α-Al₂O₃ tube (907 and 5.6 × 10⁻⁷ mol Pa⁻¹ m⁻² s⁻¹, respectively). The membrane using the Si-formed α-Al₂O₃ tube was more stable in corrosive HI gas than a membrane with a γ-Al₂O₃-formed α-Al₂O₃ tube after 300 h of stability tests. In conclusion, the developed silica membranes using the Si-formed α-Al₂O₃ tubes seem suitable for membrane reactors that produce H₂ on large scale using HI decomposition in the thermochemical iodine–sulfur process.     

液层Pr比值对环形双液层热毛细对流的影响

为了解双层流体系统上液层流体与下液层流体普朗特数(Pr)对热毛细对流的影响,通过线性稳定性分析,确定了上液层流体与下液层流体Pr比值从0.164～5.417时环形双层流体热毛细对流失稳的临界条件,预测了它们的4种流动失稳型式,即轮辐状的几乎占据了整个液层的"轮辐波"、轮辐状的热流体波与同波数共同旋向的靠热壁处流胞、径向流动的三维稳态流动、靠热壁处的短小的"边沿波"。结果表明:随着上、下液层Pr比值的增大,环形双液层流体的流动稳定性以上、下液层Pr比值0.750为分界线呈分段上升趋势。上、下液层Pr比值约为0.750时,双液层流体的稳定性最差,此时易出现流动分岔现象。为了获得更好的系统流动稳定性、提高生长晶体的质量,在选择双液层工质对时,应选择上、下液层Pr比值较大的工质对。     

Operational parameters correlated with the long-term stability of anion exchange membrane water electrolyzers

In this study, we investigated the long-term stability of anion exchange membrane water electrolyzers (AEMWEs) under various bias conditions. The cell performance was relatively stable under conditions of voltage cycling in a narrow range, constant voltage and constant current. On the other hand, a relatively dynamic condition, voltage cycling, in a wide range detrimentally affected the cell stability. Abnormally high negative and positive currents were observed when the cell voltage was switched between 2.1 and 0 V. Impedance results and post-material analyses indicated that the performance degradation was mainly due to anode catalyst detachments, which increased non-ohmic resistance in the wide range voltage cycling. An increase in ohmic resistance was also observed, which was due to the membrane dehydration that occurred in the frequent rest times. Thus, it can be said that the voltage cycling range as well as the frequency of rest times are critical operational parameters in determining the long-term stability of AEMWEs.     

Physicochemical stability of antilisterial proteins from P. polymyxa Kp10 as potential food biopreservative

Listeria monocytogenes has continuously become a significant threat to consumers worldwide. The use of chemical-derived preservatives that are commonly associated with safety and nutritional issues has prompted the use of natural-based preservatives as a better alternative. Many bacterial strains including Paenibacillus polymyxa Kp10 have been reported to produce various antimicrobial proteins and compounds that are considered more natural. However, their stability in various physicochemical conditions should be examined before being applied in various types of food. In this study, the stability of four previously identified antilisterial proteins in P. polymyxa Kp10 upon exposure to several physicochemical conditions was examined. More than 80% residual antilisterial activity is conserved upon heat and proteinase K treatment. But, sensitivity to 24 h trypsin digestion has been observed. P1 and P2 proteins (histone-like DNA binding proteins HU) were sensitive to alkaline pH (pH 10-12) as compared with other proteins. More than 70% and 97% residual antilisterial activity were recovered after incubation in raw beef homogenates and simulated meat gravy model, respectively. However, the antilisterial activity of most proteins was highly compromised in chicken and salmon meat homogenates, and UHT cow milk. Inoculation of these proteins into Listeria-contaminated simulated meat gravy showed that all proteins exerted a bactericidal action against L. monocytogenes. P1 and P2 shared almost similar antilisterial activity rates, while P4 was the most potent antilisterial protein. The findings in this study could provide important preliminary data for future applications of these proteins as preservative in food products especially beef-based meat products.     

Influences of chitosan on freeze–thaw stability of Arenga pinnata starch

This study aims to investigate chitosan (CS) with five different molecular weight (Mw) on freeze–thaw stability of Arenga pinnata starch (APS) gel subjected to five freeze–thaw cycles (FTC). The syneresis of APS gels was reduced by adding CS and the APS gel with high Mw CS had lower syneresis duo to a higher water holding capacity (P < 0.05). The addition of CS significantly decreased the hardness and molecular ordered structure of APS gel. In addition, CS could improve the microstructural stability. The results suggested that CS could effectively improve the freeze–thaw stability of APS gel, and CS with higher Mw might have more practical utility to improve stability of APS gel.     

Impact of military type footwear and load carrying workload on postural stability

Postural stability has been shown to be impacted by footwear and task performed. This study analysed the impact of two military footwear, standard boot (STB) and minimalist boot (MTB) on postural stability, before (PRE) and after (POST) a load carriage task. Sixteen participants were tested for postural stability using sensory organisation and motor control tests on Neurocom Equitest?. Postural sway, equilibrium scores and postural latencies were analysed using a two-factor repeated measures ANOVA: boot type (STB-MTB)?×?time (PRE-POST) load carriage task. Significantly greater postural sway variables, lower balance scores and slower postural latencies were seen in STB and POST load carriage conditions (p?<?.05). The results suggest that MTB exhibited greater balance compared to STB in balance conditions that rely on somatosensory feedback and that balance is lowered after a load carriage task. Decrements in postural stability could be attributed to boot design characteristics and muscular exertion due to the load carriage task.

Practitioner Summary: Maintaining optimal postural stability is crucial in military. Impact of military footwear types and load carriage task on postural stability are addressed. Findings provide footwear design and physical exertion implications on postural stability leading to potential interventions that reduce postural stability decrements; thereby, reducing potential falls and fall related injuries.